Clarence Leonidas Fender was born in 1909, and was raised in Fullerton, California. As a teenager, he developed an interest in electronics, and soon was building and repairing radios for fellow classmates. After high school, Leo Fender held a bookkeeping position while he still did radio repair at home. After holding a series of jobs, Fender opened up a full-scale radio repair shop in 1939. In addition to service work, the Fender Radio Service store soon became a general electronics retail outlet. However, the forerunner to the Fender Electric Instruments company was a smaller two-man operation that was originally started as the K & F company in 1945. Leo Fender began modestly building small amplifiers and electric lap steels with his partner, Clayton Orr Doc Kaufman. After K & F dissolved, Fender formed the Fender Electric Instrument company in 1946, located on South Pomona Avenue in Fullerton, California. The company sales, though slow at first, began to expand as his amplifiers and lap steel began meeting acceptance among West Coast musicians. In 1950, Fender successfully developed the first production solid body electric guitar. Originally the Broadcaster, the name was quickly changed to the Telecaster after the Gretsch company objected to the infringement of their Broadkaster drum sets.
Soon FenderĀ“s inventive genius began designing new models through the early 1950s and early 1960s. The Fender Precision Bass guitar was unveiled in 1951. While there is some kind of an existing background for the development of an electric solid body guitar, the notion of a 34 in. scale instrument with a fretted neck that could replace an upright acoustic doublebass was completely new to the music industry. The Precision bass (so named because players could fret the note precisely) coupled with a Fender Bassman amplifier gave the bass player more sonic projection. Fender then followed with another design in 1954, the Stratocaster. The simplicity in design, added to the popular sounds and playability, makes this design the most copied world wide. Other popular models of guitars, basses, and amplifiers soon followed.
By 1964, Fender's line of products included electric guitars, basses, steel guitars, effects units, acoustic guitars, electric pianos, and a variety of accessories. Leo's faltering health was a factor in putting the company up for sale, and he first offered it to Don Randall (the head of Fender Sales) for a million and a half dollars. Randall opened negotiations with the Baldwin Piano & Organ company, but when those negotiations fell through, offered it to the conglomerate CBS (who was looking to diversify the company holdings). Fender (FEIC) was purchased by CBS on January 5, 1965 (actually in December of 1964) for thirteen million dollars. Leo Fender was kept on as a special consultant for five years, and then left when then contract was up in 1970. Due to a ten-year, no compete clause, the next Leo Fender-designed guitars did not show up in the music industry until 1976 (Music Man).
While Fender was just another division of CBS, a number of key figures left the company. Forrest White, the production manager, left in 1967 after a dispute in producing solid state amplifiers. Don Randall left in 1969, disenchanted with corporate life. George Fullerton, one of the people involved with the Stratocaster design, left in 1970. Obviously, the quality in Fender products did not drop the day Leo Fender sold the company. Dale Hyatt, another veteran of the early Fender days, figured that the quality on the products stayed relatively stable until around 1968 (Hyatt left in 1972). But a number of cost-cutting strategies, and attempts to produce more products, had a deteriorating effect. This reputation leads right to the classic phrase heard at vintage guitar shows, "Pre-CBS?"
In the early 1980s, the Fender guitar empire began to crumble. Many cost-cutting factors and management problems forced CBS to try various last ditch efforts to salvage the instrument line. In March of 1982, Fender (with CBS' blessing) negotiated with Kanda Shokai and Yamano Music to establish Fender Japan. After discussions with Tokai (who built a great Fender Strat replica, among other nice guitars), Kawai, and others, Fender finally chose Fuji Gen Gakki (based in Matsumoto, about 130 miles northwest of Tokyo). In 1983 the Squier series was built in Japan, earmarked for European distribution. The Squier trademark came from a string-making company in Michigan (V.C. Squier) that CBS had acquired in 1965.
Instruments currently produced in Corona, CA (U.S.) since 1986, Mexico since 1990, Japan since 1982, Tianjin (China), and Korea since the mid-1980s. Distributed by the Fender Musical Instruments Corporation of Scottsdale, AZ. Instruments previously produced in Fullerton, CA between 1946 and 1985.

FENDER Electric Guitars Models

FENDER American Elite Jazz Bass V (No. 019-7100) Image

FENDER American Elite Jazz Bass V (No. 019-7100)

- offset double cutaway Jazz Bass-style alder body, bolt-on maple modern C to D Shaped neck, five-bolt neck plate, 21-fret bound rosewood or maple fingerboard with pearloid block inlays, 4/1 per-side tuners, High Mass Vintage (HMV) Topload...

FENDER VINTERA '50S STRATOCASTER MODIFIED Image

FENDER VINTERA '50S STRATOCASTER MODIFIED

- offset double cutaway Strat-style alder body, bolt-on Modern C shaped maple neck, 21-fret maple fingerboard with black dot inlays, Strat-style headstock, six-on-one-side vintage style tuners, 2-point synchronized tremolo bridge, one-ply w...

FENDER VINTERA '50S TELECASTER MODIFIED Image

FENDER VINTERA '50S TELECASTER MODIFIED

- single cutaway Tele-style alder body, bolt-on Thick Soft "V" shaped maple neck, 21-fret maple fingerboard with black dot inlays, Tele-style headstock, six-on-one-side vintage style tuners, 3-saddle vintage-style STB bridge, one-ply black...

FENDER TELECASTER (CBS MFG. 1965-1983) Image

FENDER TELECASTER (CBS MFG. 1965-1983)

- single cutaway ash body with routing channel between the pickups, bolt-on maple neck, "F" stamp on neckplate, 21-fret maple fingerboard with black dot inlays (1967-1982) or rosewood fingerboard with pearl dot inlays (1965-69), &...

FENDER 35TH ANNIVERSARY STRATOCASTER (U.S. MFG.) Image

FENDER 35TH ANNIVERSARY STRATOCASTER (U.S. MFG.)

- quilted maple top/alder body, white pickguard, bird's-eye maple neck, 22-fret ebony fingerboard with abalone dot inlay, standard vibrato, locking tuners, three single coil Silver Fender Lace Sensors, five-position selector/mini switches,...

FENDER '56 STRATOCASTER NOS (NO. 015-0402/0412) Image

FENDER '56 STRATOCASTER NOS (NO. 015-0402/0412)

- double cutaway alder or ash body, bolt-on 10/56 shaped maple neck, 21-fret maple fingerboard with black dot inlays, six-on-one-side tuners, vibrato bridge, single-ply white pickguard, three Custom '50s single coil pickups, three knobs (v,...

FENDER BASS VI (U.S. MFG.) Image

FENDER BASS VI (U.S. MFG.)

- offset double cutaway asymmetrical ash body, bolt-on maple neck, 21-fret rosewood fingerboard with pearl dot inlay, six-on-one-side tuners, floating bridge/vibrato with bridge cover, tortoise/metal or white pickguard, three single coil ex...

FENDER CORONADO BASS II (U.S. MFG.) Image

FENDER CORONADO BASS II (U.S. MFG.)

- similar to the Coronado Bass I, except has bound f-holes, a bound fingerboard with block inlays, a tune-o-matic bridge, string mutes, two single coil covered pickups, four knobs (two v, two tone), and a three-way pickup switch, mfg. 1967-...

FENDER H.M. BASS (JAPAN MFG. NO. 025-5400) Image

FENDER H.M. BASS (JAPAN MFG. NO. 025-5400)

- offset double cutaway basswood body, figured maple top and back, 22-fret rosewood fingerboard, three J bass pickups, two knobs (v, tone), five-way switch, black hardware, available in various finishes, mfg. late 1980s-early 1990s.