Clarence Leonidas Fender was born in 1909, and was raised in Fullerton, California. As a teenager, he developed an interest in electronics, and soon was building and repairing radios for fellow classmates. After high school, Leo Fender held a bookkeeping position while he still did radio repair at home. After holding a series of jobs, Fender opened up a full-scale radio repair shop in 1939. In addition to service work, the Fender Radio Service store soon became a general electronics retail outlet. However, the forerunner to the Fender Electric Instruments company was a smaller two-man operation that was originally started as the K & F company in 1945. Leo Fender began modestly building small amplifiers and electric lap steels with his partner, Clayton Orr Doc Kaufman. After K & F dissolved, Fender formed the Fender Electric Instrument company in 1946, located on South Pomona Avenue in Fullerton, California. The company sales, though slow at first, began to expand as his amplifiers and lap steel began meeting acceptance among West Coast musicians. In 1950, Fender successfully developed the first production solid body electric guitar. Originally the Broadcaster, the name was quickly changed to the Telecaster after the Gretsch company objected to the infringement of their Broadkaster drum sets.
Soon FenderĀ“s inventive genius began designing new models through the early 1950s and early 1960s. The Fender Precision Bass guitar was unveiled in 1951. While there is some kind of an existing background for the development of an electric solid body guitar, the notion of a 34 in. scale instrument with a fretted neck that could replace an upright acoustic doublebass was completely new to the music industry. The Precision bass (so named because players could fret the note precisely) coupled with a Fender Bassman amplifier gave the bass player more sonic projection. Fender then followed with another design in 1954, the Stratocaster. The simplicity in design, added to the popular sounds and playability, makes this design the most copied world wide. Other popular models of guitars, basses, and amplifiers soon followed.
By 1964, Fender's line of products included electric guitars, basses, steel guitars, effects units, acoustic guitars, electric pianos, and a variety of accessories. Leo's faltering health was a factor in putting the company up for sale, and he first offered it to Don Randall (the head of Fender Sales) for a million and a half dollars. Randall opened negotiations with the Baldwin Piano & Organ company, but when those negotiations fell through, offered it to the conglomerate CBS (who was looking to diversify the company holdings). Fender (FEIC) was purchased by CBS on January 5, 1965 (actually in December of 1964) for thirteen million dollars. Leo Fender was kept on as a special consultant for five years, and then left when then contract was up in 1970. Due to a ten-year, no compete clause, the next Leo Fender-designed guitars did not show up in the music industry until 1976 (Music Man).
While Fender was just another division of CBS, a number of key figures left the company. Forrest White, the production manager, left in 1967 after a dispute in producing solid state amplifiers. Don Randall left in 1969, disenchanted with corporate life. George Fullerton, one of the people involved with the Stratocaster design, left in 1970. Obviously, the quality in Fender products did not drop the day Leo Fender sold the company. Dale Hyatt, another veteran of the early Fender days, figured that the quality on the products stayed relatively stable until around 1968 (Hyatt left in 1972). But a number of cost-cutting strategies, and attempts to produce more products, had a deteriorating effect. This reputation leads right to the classic phrase heard at vintage guitar shows, "Pre-CBS?"
In the early 1980s, the Fender guitar empire began to crumble. Many cost-cutting factors and management problems forced CBS to try various last ditch efforts to salvage the instrument line. In March of 1982, Fender (with CBS' blessing) negotiated with Kanda Shokai and Yamano Music to establish Fender Japan. After discussions with Tokai (who built a great Fender Strat replica, among other nice guitars), Kawai, and others, Fender finally chose Fuji Gen Gakki (based in Matsumoto, about 130 miles northwest of Tokyo). In 1983 the Squier series was built in Japan, earmarked for European distribution. The Squier trademark came from a string-making company in Michigan (V.C. Squier) that CBS had acquired in 1965.
Instruments currently produced in Corona, CA (U.S.) since 1986, Mexico since 1990, Japan since 1982, Tianjin (China), and Korea since the mid-1980s. Distributed by the Fender Musical Instruments Corporation of Scottsdale, AZ. Instruments previously produced in Fullerton, CA between 1946 and 1985.

FENDER Electric Guitars Models

FENDER STANDARD TELECASTER HH (NO. 014-9400) Image

FENDER STANDARD TELECASTER HH (NO. 014-9400)

- single cutaway alder body, bolt-on maple neck, 21-fret rosewood fingerboard with white dot inlays, six-on-one-side tuners, Strat-style STB hardtail bridge, chrome hardware, three-ply pickguard, two Blacktop humbucking pickups, two knobs (...

FENDER VINTERA '60S STRATOCASTER MODIFIED Image

FENDER VINTERA '60S STRATOCASTER MODIFIED

- offset double cutaway Strat-style alder body, bolt-on Modern C shaped maple neck, 21-fret Pau Ferro fingerboard with white dot inlays, Strat-style headstock, six-on-one-side vintage style tuners, 2-point synchronized tremolo bridge, three...

FENDER VINTERA '60S TELECASTER MODIFIED Image

FENDER VINTERA '60S TELECASTER MODIFIED

- single cutaway Tele-style alder body, bolt-on '60s "C" shaped maple neck, 21-fret Pau Ferro fingerboard with white dot inlays, Tele-style headstock, six-on-one-side vintage style tuners, three-saddle Vintage Style STB Tele bridge, three-p...

FENDER AMERICAN ULTRA STRATOCASTER HSS Image

FENDER AMERICAN ULTRA STRATOCASTER HSS

- offset double cutaway Strat-style alder or ash body with sculpted rear contours, bolt-on modern D shaped maple neck, rolled fingerboard edge, 22-fret maple or rosewood compound radius fingerboard with pearloid dot inlays, Strat-style head...

FENDER JP-90 (U.S. MFG. NO. 014-4100) Image

FENDER JP-90 (U.S. MFG. NO. 014-4100)

- offset double cutaway asymmetrical poplar body, bolt-on maple neck, 20-fret rosewood fingerboard with pearl dot inlay, four-on-one-side tuners, fixed bridge, small black pickguard, one split coil P-style pickup (neck) and one J-style pick...

FENDER BULLET H-2 Image

FENDER BULLET H-2

- strings through bridge, two covered humbucker pickups, three-position switch, two push button coil split switches, mfg. 1983 only.

FENDER DUO-SONIC RECENT MFG. Image

FENDER DUO-SONIC RECENT MFG.

- offset double cutaway alder body, bolt-on maple neck, 22-fret maple fingerboard with black dot inlays, six-on-a-side tuners, hardtail bridge, white pickguard, two single coil pickups, two knobs (v, tone), three-way pickup switch, chrome h...

FENDER '54 ESQUIRE REISSUE (JAP. MFG.) Image

FENDER '54 ESQUIRE REISSUE (JAP. MFG.)

- single cutaway ash body, black pickguard, bolt-on maple neck, 21-fret maple fingerboard with black dot inlay, strings through bridge with cover, six-on-one-side tuners, chrome hardware, single coil pickup, two knobs (v, tone), three-posit...

FENDER FLAME STANDARD (JAPAN MFG.) Image

FENDER FLAME STANDARD (JAPAN MFG.)

- double cutaway body, carved maple top, maple set neck, rosewood fingerboard, fully bound body and neck, two humbucker pickups with exposed poles, individual string bridge and tailpiece, two knobs, three-way switch, three-per-side tuners,...

FENDER KATANA (JAPAN MFG.)  Image

FENDER KATANA (JAPAN MFG.)

- wedge-shaped body, maple set neck, 22-fret rosewood fingerboard with offset triangle position markers, arrow-head shaped headstock, two-pivot bridge with vibrato, two black exposed-coil humbucking pickups, two knobs (v, tone), three-way s...