- 90W (switchable to 45W), guitar head unit, eleven tube chassis, preamp: 7 X 12AX7, power: 4 X 6L6 or EL34, solid-state rectifier, single channel, three modes (clean, vintage lo, vintage hi), reverb, front black control panel, single input, six black knobs (MV, p, b, m, t, v), power switch, standby switch, three-way mode switch, footswitch jack, rear control panel: power select switch (90 or 45W), footswitch jack, reverb control knob with bypass and hi/low defeat switch, effects loop, slave out with level control, Bias switch (EL34/6L6), speaker out jacks with ohm switch, two-button footswitch, 17 in. aluminum chassis, available in 22.75 in. or 26.75 in. widths, black Taurus covering, black oval grille cloth, slip cover included, mfg. 2009-2013.

- similar to the Electra Dyne Head, except in rackmount head configuration, mfg. 2009-2013.

- similar to the Electra Dyne Head, except in combo configuration with 1-12 in. speaker and casters, available in 22.75 in. or 26.75 in. (2009-2010) widths, mfg. 2009-2013.

- similar to the Electra Dyne Head, except in combo configuration with 2-12 in. speakers and casters, mfg. 2009-2013.

- 90W, 1-12 in. Celestion 90 speaker, 8 ohm impedance, designed for use with the Electra Dyne heads and combos, available in Black Taurus covering with a black grille and silver piping, 23 in. wide, 18 in. tall, 11.75 in. deep, mfg. mid-2009-2013.

- 90W, 1-12 in. Celestion 90 speaker, 8 ohm impedance, designed for use with the Electra Dyne heads and combos, available in Black Taurus covering with a black grille and silver piping, 26.75 in. wide, 18 in. tall, 11.75 in. deep, mfg. mid-2009-2013.

- 120W, 2-12 in. Celestion V30 speakers, 8 ohm impedance, designed for use with the Electra Dyne heads and combos, available in Black Taurus covering with a black grille and silver piping, 26.75 in. wide, 18 in. tall, 11.75 in. deep, mfg. mid-2009-2013.