Clarence Leonidas Fender was born in 1909, and was raised in Fullerton, California. As a teenager, he developed an interest in electronics, and soon was building and repairing radios for fellow classmates. After high school, Leo Fender held a bookkeeping position while he still did radio repair at home. After holding a series of jobs, Fender opened up a full-scale radio repair shop in 1939. In addition to service work, the Fender Radio Service store soon became a general electronics retail outlet. However, the forerunner to the Fender Electric Instruments company was a smaller two-man operation that was originally started as the K & F company in 1945. Leo Fender began modestly building small amplifiers and electric lap steels with his partner, Clayton Orr Doc Kaufman. After K & F dissolved, Fender formed the Fender Electric Instrument company in 1946, located on South Pomona Avenue in Fullerton, California. The company sales, though slow at first, began to expand as his amplifiers and lap steel began meeting acceptance among West Coast musicians. In 1950, Fender successfully developed the first production solid body electric guitar. Originally the Broadcaster, the name was quickly changed to the Telecaster after the Gretsch company objected to the infringement of their Broadkaster drum sets.
Soon FenderĀ“s inventive genius began designing new models through the early 1950s and early 1960s. The Fender Precision Bass guitar was unveiled in 1951. While there is some kind of an existing background for the development of an electric solid body guitar, the notion of a 34 in. scale instrument with a fretted neck that could replace an upright acoustic doublebass was completely new to the music industry. The Precision bass (so named because players could fret the note precisely) coupled with a Fender Bassman amplifier gave the bass player more sonic projection. Fender then followed with another design in 1954, the Stratocaster. The simplicity in design, added to the popular sounds and playability, makes this design the most copied world wide. Other popular models of guitars, basses, and amplifiers soon followed.
By 1964, Fender's line of products included electric guitars, basses, steel guitars, effects units, acoustic guitars, electric pianos, and a variety of accessories. Leo's faltering health was a factor in putting the company up for sale, and he first offered it to Don Randall (the head of Fender Sales) for a million and a half dollars. Randall opened negotiations with the Baldwin Piano & Organ company, but when those negotiations fell through, offered it to the conglomerate CBS (who was looking to diversify the company holdings). Fender (FEIC) was purchased by CBS on January 5, 1965 (actually in December of 1964) for thirteen million dollars. Leo Fender was kept on as a special consultant for five years, and then left when then contract was up in 1970. Due to a ten-year, no compete clause, the next Leo Fender-designed guitars did not show up in the music industry until 1976 (Music Man).
While Fender was just another division of CBS, a number of key figures left the company. Forrest White, the production manager, left in 1967 after a dispute in producing solid state amplifiers. Don Randall left in 1969, disenchanted with corporate life. George Fullerton, one of the people involved with the Stratocaster design, left in 1970. Obviously, the quality in Fender products did not drop the day Leo Fender sold the company. Dale Hyatt, another veteran of the early Fender days, figured that the quality on the products stayed relatively stable until around 1968 (Hyatt left in 1972). But a number of cost-cutting strategies, and attempts to produce more products, had a deteriorating effect. This reputation leads right to the classic phrase heard at vintage guitar shows, "Pre-CBS?"
In the early 1980s, the Fender guitar empire began to crumble. Many cost-cutting factors and management problems forced CBS to try various last ditch efforts to salvage the instrument line. In March of 1982, Fender (with CBS' blessing) negotiated with Kanda Shokai and Yamano Music to establish Fender Japan. After discussions with Tokai (who built a great Fender Strat replica, among other nice guitars), Kawai, and others, Fender finally chose Fuji Gen Gakki (based in Matsumoto, about 130 miles northwest of Tokyo). In 1983 the Squier series was built in Japan, earmarked for European distribution. The Squier trademark came from a string-making company in Michigan (V.C. Squier) that CBS had acquired in 1965.
Instruments currently produced in Corona, CA (U.S.) since 1986, Mexico since 1990, Japan since 1982, Tianjin (China), and Korea since the mid-1980s. Distributed by the Fender Musical Instruments Corporation of Scottsdale, AZ. Instruments previously produced in Fullerton, CA between 1946 and 1985.

FENDER Electric Guitars Models

FENDER '70s JAZZ BASS (MEX. MFG. NO. 013-2000) Image

FENDER '70s JAZZ BASS (MEX. MFG. NO. 013-2000)

- offset double cutaway Jazz-style alder body based on a 1970s model, bolt-on '70s-style C-shaped maple neck, 20-fret bound rosewood fingerboard with pearloid block inlays, Jazz-style headstock with bullet truss rod adj. nut, four-on-one-si...

FENDER BULLET H-2 Image

FENDER BULLET H-2

- strings through bridge, two covered humbucker pickups, three-position switch, two push button coil split switches, mfg. 1983 only.

FENDER DUO-SONIC RECENT MFG. Image

FENDER DUO-SONIC RECENT MFG.

- offset double cutaway alder body, bolt-on maple neck, 22-fret maple fingerboard with black dot inlays, six-on-a-side tuners, hardtail bridge, white pickguard, two single coil pickups, two knobs (v, tone), three-way pickup switch, chrome h...

FENDER '54 ESQUIRE REISSUE (JAP. MFG.) Image

FENDER '54 ESQUIRE REISSUE (JAP. MFG.)

- single cutaway ash body, black pickguard, bolt-on maple neck, 21-fret maple fingerboard with black dot inlay, strings through bridge with cover, six-on-one-side tuners, chrome hardware, single coil pickup, two knobs (v, tone), three-posit...

FENDER FLAME STANDARD (JAPAN MFG.) Image

FENDER FLAME STANDARD (JAPAN MFG.)

- double cutaway body, carved maple top, maple set neck, rosewood fingerboard, fully bound body and neck, two humbucker pickups with exposed poles, individual string bridge and tailpiece, two knobs, three-way switch, three-per-side tuners,...

FENDER KATANA (JAPAN MFG.)  Image

FENDER KATANA (JAPAN MFG.)

- wedge-shaped body, maple set neck, 22-fret rosewood fingerboard with offset triangle position markers, arrow-head shaped headstock, two-pivot bridge with vibrato, two black exposed-coil humbucking pickups, two knobs (v, tone), three-way s...

FENDER '65 MUSTANG REISSUE (JAPAN MFG. 027-3706) Image

FENDER '65 MUSTANG REISSUE (JAPAN MFG. 027-3706)

- reissue of the 1965 Mustang with vintage correct styling (logos, F neckplate, etc.), poplar body, bolt-on C-shaped maple neck, 22-fret rosewood fingerboard with dot inlays, six-on-one-side tuners with white buttons, floating bridge with D...

FENDER STRATOCASTER (CBS MFG. 1965-1971) Image

FENDER STRATOCASTER (CBS MFG. 1965-1971)

- offset double cutaway alder body with smaller body contours, bolt-on four-screw maple neck, 21-fret rosewood fingerboard with clay off-white dot inlays, large Strat-style headstock, six-on-one-side tuners, tremolo bridge, three-layer plas...

FENDER BULLET S-2 Image

FENDER BULLET S-2

- laminated plastic pickguard, strings through bridge, two single coil covered pickups, three-position switch, mfg. 1983 only.

FENDER Duo-Sonic HS Recent Mfg. Image

FENDER Duo-Sonic HS Recent Mfg.

- offset double cutaway alder body, bolt-on maple neck, 22-fret rosewood fingerboard with white dot inlays, six-on-a-side tuners, hardtail bridge, white pickguard, one single coil and one humbucking pickup, two knobs (v, tone), three-way pi...

FENDER Flame Elite (Japan Mfg.)  Image

FENDER Flame Elite (Japan Mfg.)

- similar to the Flame Standard, except has Snowflake fingerboard inlays, pearl tuners, fine tuner tailpiece, four knobs, and a coil-tap switch, available in Sunburst or other colors, mfg. 1984 only.

FENDER LEAD I (U.S. MFG.) Image

FENDER LEAD I (U.S. MFG.)

- offset double cutaway alder body slightly similar to a Strat, bolt-on maple neck, 21-fret maple fingerboard with black dot inlays or rosewood fingerboard with pearl dot inlays, Strat-style headstock with "Lead I" logo and six-on...

FENDER 1952 TELECASTER HB RELIC (NO. 150-5402) Image

FENDER 1952 TELECASTER HB RELIC (NO. 150-5402)

- single cutaway premium ash Tele-style body, bolt-on mid-1950s soft V-shaped one-piece maple neck, 21-fret maple fingerboard with Dunlop 6105 frets and black dot inlays, Tele-style headstock, six-on-one-side Gotoh tuners, original vintage...

FENDER MB-4 (JAPAN MFG. NO. 025-4700) Image

FENDER MB-4 (JAPAN MFG. NO. 025-4700)

- offset double cutaway basswood or poplar body slightly similar in design to the Precision Bass with narrower bouts, bolt-on maple neck, 22-fret rosewood fingerboard with pearl dot inlays, thin headstock with black overlay, two-per-side tu...